High pressure pipe manufacturer: Introduce how to connect high pressure pipes
Publication time:
2020-10-19
Solving the problem of quick couplings in water pipes is a very fast method,and I believe many friends do not have much understanding of high-speed and high-pressure couplings in water pipes.
How to connect high-pressure water pipes:
Solving the problem of quick couplings in water pipes is a very fast method,and I believe many friends do not have much understanding of high-speed and high-pressure couplings in water pipes.In fact,the hose can be quickly connected to faucets,spray and hoses.Yes,this method is very time-consuming and very convenient to use.The quick connection method for high-pressure water pipe joints is as follows:first,quick connections must be installed at both ends of the water pipe.At this point,we need to tighten the nut slightly next to it.The next step is to connect the faucet connector or use the spray gun connector.If you hear the sound of"Kat"during this process,the quick connection of the high-pressure pipeline that needs to be connected has been completed.
2.Closed pipe joint:When closing the pressure machine joint and mold accessories,and when the high-pressure pipe quick joint is not compressed,the head and end bear the pipe under the action of the corresponding ejector pin and spring.Communication.Generally,the upper needle of the head and the female head can be closed separately to immediately stop liquid flow.In the connected state,when the common head is inserted into the head,the up arrow returns to its original position under the action of the spring,the steel ball rolls to tightly connect the common head,and the head and up arrow push each other apart to open,allowing the liquid to flow,The O-ring can completely prevent liquid leakage in the quick connection of high-pressure water pipes.
When the mold joint and mold nozzle are open,the quick connection of the high-pressure pipe opens.When the copper sleeve on the head is not connected to the other end,the steel ball automatically rolls outward.The man's head was cut off.In this case,due to the absence of valves on both the common and female heads,the liquid will flow out.In the connected state,insert the sun head into the shutter and use spring force to push the copper sleeve to the previous position.The steel ball is locked and liquid flows,and the O-ring will prevent the liquid from flowing out.
4.Quickly connect the combination water pipe,open the mold nozzle,and quickly connect the high-pressure water pipe.When closing the mold joint,the copper sleeve in the concave main pipe moves to the other end,and the stainless steel ball automatically rolls outward.The protruding head opens under the reaction of the valve spring.At this point,the valve automatically closes to prevent liquid flow.Insert the common plug into the female plug while connected.At this point,due to its elasticity,the copper sleeve is pushed to the front position,locking the steel ball and allowing the liquid to flow.The O-ring in the quick connection of high-pressure pipelines will prevent liquid from flowing out.
What is a high-pressure pipeline
2020-12-09
Introduction to Fireproof Hoses
2020-11-09
2020-11-03
Introduction to Fireproof Hoses
2020-10-28
A company specializing in the research and development, design and production of various rubber hoses.
Linge Rubber and Plastic Aofenglian International Trading
Address: No. 100, Kunming Road, Liujiagou town, Penglai city, Shandong province
Tel: +86-535-5607646
Fax: +86-535-5613080
E-mail: aofl@linge-xiangsu.com
© Penglai Linge Rubber and Plastic Products Co., Ltd.
SAF Coolest v1.3.1.1 设置面板 HNJSX-ZAYD-PAASE-ZZV
无数据提示
Sorry, there is currently no content in the current column!
You can view other sections or go back HOME